Over 0–100 km/h, John Cooper Works FWD wins (6,21 s vs 6,40 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| John Cooper Works FWD | 225d F22 | |
|---|---|---|
| 0–100 km/h | 6,21 s−0,19 s | 6,40 s |
| 400 m standing start | 14,26 s−0,35 s | 14,61 s |
| 1,000 m standing start | 25,30 s−0,98 s | 26,28 s |
| Top speed (electronically limited) | 251 km/h+8 km/h | 243 km/h |
| Power-to-weight ratio | 5,09 kg/hpbetter ratio | 6,58 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | John Cooper Works FWD | 225d F22 |
|---|---|---|
| 0–30 km/h | 1,85 s | 1,85 stight gap |
| 0–50 km/h | 3,09 s | 2,98 stight gap |
| 0–80 km/h | 4,95 s | 4,76 s |
| 0–100 km/h | 6,21 s | 6,40 s |
| 0–120 km/h | 7,93 s | 8,49 s |
| 0–160 km/h | 12,59 s | 14,42 s |
| 0–200 km/h | 20,51 s | 24,76 s |
| 400 m standing start | 14,26 s | 14,61 s |
| 1,000 m standing start | 25,30 s | 26,28 s |
| Top speed | 251 km/h | 243 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 231 hp | Pending |
| Torque | 320 Nm | |
| Weight | 1 175 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | 8-speed automatic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 224 hp | 4 cyl |
| Torque | 450 Nm | |
| Weight | 1 475 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 8-speed Steptronic |
Off the line, the John Cooper Works FWD hits 100 km/h in 6.21 s versus 6.40 s for the Bmw 225d. Despite the faster sprint time, the Bmw 225d is 2 m further along the track at this moment: stronger low-speed acceleration offsets a slower run beyond 100 km/h.
At 200 metres, the John Cooper Works FWD is doing 137 km/h against 130 km/h for the Bmw 225d. The gap is 0.08 s. The challenger starts to claw back ground.
At 400 metres standing start, the John Cooper Works FWD crosses the line in 14.26 s versus 14.61 s. The 0.35 s gap represents roughly 16 m of track - two to three car lengths.
Past 400 metres, the John Cooper Works FWD continues to build its lead. At 600 metres, it runs at 191 km/h versus 180 km/h. At 1,000 metres, the John Cooper Works FWD finishes in 25.29 s versus 26.28 s, with a 0.99 s lead. Both vehicles have similar top speeds (251 (i.e. 155 mph - industry threshold) vs 243 km/h), preventing any comeback.
Electronically capped at 243 km/h, the Bmw 225d never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.09 kg/hp vs 6.58 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 9.71 seconds. The 0.19 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, John Cooper Works FWD wins (6,21 s vs 6,40 s).
John Cooper Works FWD goes from 0 to 100 km/h in 6,21 seconds (calibrated simulation).
John Cooper Works FWD: 231 hp, ratio 5,09 kg/hp. 225d F22: 224 hp, ratio 6,58 kg/hp.
John Cooper Works FWD: 251 km/h. 225d F22: 243 km/h.