Over 0–100 km/h, John Cooper Works FWD wins (6,21 s vs 7,27 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| John Cooper Works FWD | C 220 d W206 | |
|---|---|---|
| 0–100 km/h | 6,21 s−1,06 s | 7,27 s |
| 400 m standing start | 14,26 s−1,02 s | 15,28 s |
| 1,000 m standing start | 25,30 s−2,37 s | 27,67 s |
| Top speed (electronically limited) | 251 km/h+14 km/h | 237 km/h |
| Power-to-weight ratio | 5,09 kg/hpbetter ratio | 8,20 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | John Cooper Works FWD | C 220 d W206 |
|---|---|---|
| 0–30 km/h | 1,85 s | 1,60 s |
| 0–50 km/h | 3,09 s | 2,82 s |
| 0–80 km/h | 4,95 s | 5,23 s |
| 0–100 km/h | 6,21 s | 7,27 s |
| 0–120 km/h | 7,93 s | 9,96 s |
| 0–160 km/h | 12,59 s | 17,47 s |
| 0–200 km/h | 20,51 s | 30,23 s |
| 400 m standing start | 14,26 s | 15,28 s |
| 1,000 m standing start | 25,30 s | 27,67 s |
| Top speed | 251 km/h | 237 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 231 hp | Pending |
| Torque | 320 Nm | |
| Weight | 1 175 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | 8-speed automatic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 200 hp | Pending |
| Torque | 440 Nm | |
| Weight | 1 640 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | 9G-Tronic |
Off the line, the John Cooper Works FWD hits 100 km/h in 6.21 s versus 7.27 s for the C 220 d. Despite the faster sprint time, the C 220 d is 1 m further along the track at this moment: stronger low-speed acceleration offsets a slower run beyond 100 km/h.
At 200 metres, the John Cooper Works FWD is doing 137 km/h against 120 km/h for the C 220 d. The gap is 0.38 s. The challenger starts to claw back ground.
At 400 metres standing start, the John Cooper Works FWD crosses the line in 14.26 s versus 15.28 s. The 1.02 s gap represents roughly 42 m of track - a gap visible to the naked eye.
Past 400 metres, the John Cooper Works FWD continues to build its lead. At 600 metres, it runs at 191 km/h versus 169 km/h. At 1,000 metres, the John Cooper Works FWD finishes in 25.29 s versus 27.67 s, with a 2.37 s lead. Both vehicles have similar top speeds (251 (i.e. 155 mph - industry threshold) vs 237 km/h), preventing any comeback.
Electronically capped at 237 km/h, the C 220 d never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.09 kg/hp vs 8.20 kg/hp) and transmission (Automatic vs Unknown).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 11.48 seconds. The 1.06 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, John Cooper Works FWD wins (6,21 s vs 7,27 s).
John Cooper Works FWD goes from 0 to 100 km/h in 6,21 seconds (calibrated simulation).
John Cooper Works FWD: 231 hp, ratio 5,09 kg/hp. C 220 d W206: 200 hp, ratio 8,20 kg/hp.
John Cooper Works FWD: 251 km/h. C 220 d W206: 237 km/h.