Over 0–100 km/h, ID.3 Pro wins (7,35 s vs 10,76 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| ID.3 Pro | 116i F40 | |
|---|---|---|
| 0–100 km/h | 7,35 s−3,41 s | 10,76 s |
| 400 m standing start | 15,50 s−2,15 s | 17,65 s |
| 1,000 m standing start | 29,13 s−3,26 s | 32,39 s |
| Top speed (electronically limited) | 160 km/h | 195 km/h−35 km/h |
| Power-to-weight ratio | 8,82 kg/hpbetter ratio | 12,29 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | ID.3 Pro | 116i F40 |
|---|---|---|
| 0–30 km/h | 1,88 s | 2,05 s |
| 0–50 km/h | 3,15 s | 3,56 s |
| 0–80 km/h | 5,31 s | 7,30 s |
| 0–100 km/h | 7,35 s | 10,76 s |
| 0–120 km/h | 10,01 s | 15,50 s |
| 0–160 km/h | 18,97 s | 31,49 s |
| 400 m standing start | 15,50 s | 17,65 s |
| 1,000 m standing start | 29,13 s | 32,39 s |
| Top speed | 160 km/h | 195 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 204 hp | Permanent Magnet Synchronous Motor |
| Torque | 310 Nm | |
| Weight | 1 800 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | Single-speed fixed gear |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 109 hp | 3 cyl |
| Torque | 180 Nm | |
| Weight | 1 340 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 6-speed manual |
Off the line, the ID.3 Pro hits 100 km/h in 7.35 s versus 10.76 s for the Bmw 116i. The instant torque of 310 Nm from the electric motor makes the difference. At this point, the ID.3 Pro leads by 3.41 s and sits roughly 18 m ahead.
At 200 metres, the ID.3 Pro is doing 121 km/h against 103 km/h for the Bmw 116i. The gap is 1.26 s. The challenger starts to claw back ground.
At 400 metres standing start, the ID.3 Pro crosses the line in 15.50 s versus 17.65 s. The 2.15 s gap represents roughly 74 m of track - a gap visible to the naked eye.
Past 400 metres, the ID.3 Pro continues to build its lead. At 600 metres, it runs at 160 km/h versus 143 km/h. At 1,000 metres, the ID.3 Pro finishes in 29.13 s versus 32.38 s, with a 3.26 s lead. Despite a higher top speed (195 km/h), the Bmw 116i never recovers its launch deficit.
Both rivals are electronically governed, but not at the same level: the ID.3 Pro is capped at 160 km/h, the Bmw 116i at 195 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 18.41 seconds. The 3.41 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, ID.3 Pro wins (7,35 s vs 10,76 s).
ID.3 Pro goes from 0 to 100 km/h in 7,35 seconds (calibrated simulation).
ID.3 Pro: 204 hp, ratio 8,82 kg/hp. 116i F40: 109 hp, ratio 12,29 kg/hp.
ID.3 Pro: 160 km/h. 116i F40: 195 km/h.