Fiat 500 1.0 Hybrid 70 DDCT: 0-100 and simulated times
Caralogy physics simulation - lap times, acceleration curve, segment positioning.
Result
Full-throttle acceleration curve
Accelerations · standing start
- 0 → 30 km/h
- 3,9 s
- 0 → 40 km/h
- 4,8 s
- 0 → 50 km/h
- 5,8 s
- 0 → 60 km/h
- 7,1 s
- 0 → 70 km/h
- 8,7 s
- 0 → 80 km/h
- 10,3 s
- 0 → 90 km/h
- 12,1 s
- 0 → 100 km/h
- 14,3 s
- 0 → 110 km/h
- 17,3 s
- 0 → 120 km/h
- 20,4 s
- 0 → 130 km/h
- 24,1 s
- 0 → 140 km/h
- 28,6 s
- 0 → 150 km/h
- 34,6 s
- 0 → 160 km/h
- 44,0 s
Distances · top speed
- 400 m (1/4 mile)
- 20,2 s
- Trap speed 400 m
- 119 km/h
- 1,000 m
- 35,9 s
- Top speed reached
- 179 km/h
Detailed performance measurements
All measurements produced by the Caralogy simulation engine for this vehicle.
- Power
- 69 ch · 51 kW
- Torque
- 92 Nm
- Kerb weight
- 1 055 kg
- Weight / Power
- 15,3 kg/ch
How Caralogy calculates these lap times
All values are produced by the Caralogy physics simulation engine from mass, SCx, power curve, max wheel torque, transmission ratio and traction. They may differ from published measurements as lap times vary by test protocol, specimen and conditions. Our goal is to provide comparable lap times across vehicles.
Rear-wheel drive: weight transfer aids rear grip, but high torque can cause wheelspin.
Analysis
Fiat 500 1.0 Hybrid 70 DDCT performance analysis
-0,1 s under the manufacturer figure
The Fiat 500 1.0 Hybrid 70 DDCT reaches 100 km/h in 14,3 s in our simulation, i.e. -0,1 s against the 14,4 s quoted by the manufacturer. Performance times vary with many factors: test conditions (temperature, road surface, wind, tyres), the specific car tested (press vehicles are often in optimal trim), the measurement protocol of each tester, and the driver. That is why Autocar, Car and Driver or MotorTrend can quote different times for the same model. Caralogy does not try to reproduce those conditions — they are not reproducible at scale — but to provide times that are comparable between vehicles, computed under identical simulation conditions.
Rear-wheel drive — rear grip off the line
With rear-wheel drive, weight transfer at launch loads the rear wheels, which helps grip. But high torque can still cause wheelspin, especially on a wet surface.
0–200 km/h and high speeds
At high speed, aerodynamic drag grows with the square of velocity. CdA and peak power become the deciding factors.
Position within the {0} segment
Where does the {0} stand against the other cars in its segment? Fiat 500 1.0 Hybrid 70 DDCT sits among the cars of its segment. Times are compared under identical simulation conditions, so the ranking is fair.
Against its rivals: 0-100 km/h
Compare with a rival
- Hyundai i30 Fastback 1.5 T-GDi 48V 160 ch vs Fiat 500 1.0 Hybrid 70 DDCT duel160 ch · 6,3 L/100 km8,4 s · 5,9 s faster
- Renault Clio 6 E-Tech Full Hybrid 160 vs Fiat 500 1.0 Hybrid 70 DDCT duel160 ch · 3,9 L/100 km8,6 s · 5,7 s faster
- Peugeot 208 Hybrid 145 e-DCS6 vs Fiat 500 1.0 Hybrid 70 DDCT duel145 ch · 4,6 L/100 km8,0 s · 6,3 s faster
Continue with the Fiat 500 1.0 Hybrid 70 DDCT
The same car, from other angles.