Sur 0–100 km/h, 120i F20LCI gagne (7,12 s vs 7,32 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| 120i F20LCI | Cooper SE FWD | |
|---|---|---|
| 0–100 km/h | 7,12 s−0,20 s | 7,32 s |
| 400 m standing start | 15,22 s−0,24 s | 15,46 s |
| 1,000 m standing start | 27,53 s−2,33 s | 29,86 s |
| Top speed (electronically limited) | 225 km/h+75 km/h | 150 km/h |
| Power-to-weight ratio | 7,47 kg/hp | 7,42 kg/hpbetter ratio |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | 120i F20LCI | Cooper SE FWD |
|---|---|---|
| 0–30 km/h | 1,79 s | 2,03 s |
| 0–50 km/h | 2,99 s | 3,40 s |
| 0–80 km/h | 5,16 s | 5,51 s |
| 0–100 km/h | 7,12 s | 7,32 s |
| 0–120 km/h | 9,70 s | 9,71 stight gap |
| 0–160 km/h | 16,79 s | — |
| 0–200 km/h | 29,61 s | — |
| 400 m standing start | 15,22 s | 15,46 s |
| 1,000 m standing start | 27,53 s | 29,86 s |
| Top speed | 225 km/h | 150 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 184 hp | 4 cyl |
| Torque | 270 Nm | |
| Weight | 1 375 kg | manufacturer kerb weight |
| Drivetrain | 120i | |
| Gearbox | 8-speed Steptronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 184 hp | Pending |
| Torque | 270 Nm | |
| Weight | 1 365 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | Single-speed fixed gear |
Off the line, the Bmw 120i hits 100 km/h in 7.12 s versus 7.32 s for the Cooper SE FWD. Despite lacking instant torque, 184 hp of power compensates. At this point, the Bmw 120i leads by 0.20 s and sits roughly 8 m ahead.
At 200 metres, the Bmw 120i is doing 122 km/h against 124 km/h for the Cooper SE FWD. The gap is 0.27 s. The gap remains stable from the start.
At 400 metres standing start, the Bmw 120i crosses the line in 15.22 s versus 15.46 s. The 0.24 s gap represents roughly 10 m of track — two to three car lengths.
Past 400 metres, the Bmw 120i continues to build its lead. At 600 metres, it runs at 170 km/h versus 150 km/h. At 1,000 metres, the Bmw 120i finishes in 27.52 s versus 29.86 s, with a 2.34 s lead.
Both rivals are electronically governed, but not at the same level: the Bmw 120i is capped at 225 km/h, the Cooper SE FWD at 150 km/h. This isn’t a physical engine limit — it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 11.27 seconds. The 0.20 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Sur 0–100 km/h, 120i F20LCI gagne (7,12 s vs 7,32 s).
120i F20LCI passe de 0 à 100 km/h en 7,12 secondes (simulation calibrée).
120i F20LCI : 184 hp, ratio 7,47 kg/hp. Cooper SE FWD : 184 hp, ratio 7,42 kg/hp.
120i F20LCI : 225 km/h. Cooper SE FWD : 150 km/h.