Over 0–100 km/h, 225i xDrive F44 wins (6,41 s vs 6,58 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| P7 | 225i xDrive F44 | |
|---|---|---|
| 0–100 km/h | 6,58 s | 6,41 s+0,17 s |
| 400 m standing start | 14,81 s | 14,61 s+0,20 s |
| 1,000 m standing start | 27,64 s | 26,49 s+1,15 s |
| Top speed (electronically limited) | 170 km/h | 235 km/h−65 km/h |
| Power-to-weight ratio | 7,59 kg/hp | 6,58 kg/hpbetter ratio |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | P7 | 225i xDrive F44 |
|---|---|---|
| 0–30 km/h | 1,75 s | 1,66 stight gap |
| 0–50 km/h | 2,93 s | 2,77 s |
| 0–80 km/h | 4,84 s | 4,66 s |
| 0–100 km/h | 6,58 s | 6,41 s |
| 0–120 km/h | 8,81 s | 8,60 s |
| 0–160 km/h | 15,66 s | 14,90 s |
| 0–200 km/h | - | 26,60 s |
| 400 m standing start | 14,81 s | 14,61 s |
| 1,000 m standing start | 27,64 s | 26,49 s |
| Top speed | 170 km/h | 235 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 263 hp | Permanent Magnet Synchronous Motor |
| Torque | 390 Nm | |
| Weight | 1 995 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | Single-speed fixed gear |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 231 hp | 4 cyl |
| Torque | 350 Nm | |
| Weight | 1 520 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | 8-speed Steptronic |
Off the line, the Bmw 225i xDrive hits 100 km/h in 6.41 s versus 6.58 s for the P7. Despite lacking instant torque, 231 hp of power compensates. At this point, the Bmw 225i xDrive leads by 0.17 s and sits roughly 4 m ahead.
At 200 metres, the Bmw 225i xDrive is doing 128 km/h against 127 km/h for the P7. The gap is 0.15 s. The gap remains stable from the start.
At 400 metres standing start, the Bmw 225i xDrive crosses the line in 14.60 s versus 14.81 s. The 0.21 s gap represents roughly 9 m of track - barely a car length.
Past 400 metres, the Bmw 225i xDrive continues to build its lead. At 600 metres, it runs at 177 km/h versus 170 km/h. At 1,000 metres, the Bmw 225i xDrive finishes in 26.49 s versus 27.64 s, with a 1.15 s lead.
The Bmw 225i xDrive features all-wheel drive (AWD) against the P7’s RWD. At low speeds (0-30, 0-50, 0-80 km/h), AWD doubles the driven contact area: all four wheels transmit torque to the road, virtually eliminating wheelspin at launch. This traction advantage is decisive in the range where the motor delivers peak torque, before power and aerodynamics take over.
Both rivals are electronically governed, but not at the same level: the P7 is capped at 170 km/h, the Bmw 225i xDrive at 235 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 10.18 seconds. The 0.17 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, 225i xDrive F44 wins (6,41 s vs 6,58 s).
P7 goes from 0 to 100 km/h in 6,58 seconds (calibrated simulation).
P7: 263 hp, ratio 7,59 kg/hp. 225i xDrive F44: 231 hp, ratio 6,58 kg/hp.
P7: 170 km/h. 225i xDrive F44: 235 km/h.