Over 0–100 km/h, M440i xDrive F32 wins (4,47 s vs 6,86 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| M440i xDrive F32 | iX3 G08 | |
|---|---|---|
| 0–100 km/h | 4,47 s−2,39 s | 6,86 s |
| 400 m standing start | 12,66 s−2,42 s | 15,08 s |
| 1,000 m standing start | 22,97 s−4,57 s | 27,54 s |
| Top speed (electronically limited) | 250 km/h+70 km/h | 180 km/h |
| Power-to-weight ratio | 4,65 kg/hpbetter ratio | 7,64 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | M440i xDrive F32 | iX3 G08 |
|---|---|---|
| 0–30 km/h | 1,17 s | 1,89 s |
| 0–50 km/h | 1,94 s | 3,16 s |
| 0–80 km/h | 3,29 s | 5,13 s |
| 0–100 km/h | 4,47 s | 6,86 s |
| 0–120 km/h | 5,93 s | 9,11 s |
| 0–160 km/h | 9,85 s | 16,42 s |
| 0–200 km/h | 15,71 s | - |
| 400 m standing start | 12,66 s | 15,08 s |
| 1,000 m standing start | 22,97 s | 27,54 s |
| Top speed limited | 250 km/h | 180 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 374 hp | 6 cyl |
| Torque | 500 Nm | |
| Weight | 1 740 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | Eight-speed Steptronic transmission |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 286 hp | Pending |
| Torque | 400 Nm | |
| Weight | 2 185 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | Automatic transmission, single-speed with fixed ratio |
Off the line, the Bmw M440i xDrive hits 100 km/h in 4.47 s versus 6.86 s for the Bmw iX3. Despite lacking instant torque, 374 hp of power compensates. At this point, the Bmw M440i xDrive leads by 2.39 s and sits roughly 24 m ahead.
At 200 metres, the Bmw M440i xDrive is doing 146 km/h against 126 km/h for the Bmw iX3. The gap is 1.69 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw M440i xDrive crosses the line in 12.66 s versus 15.07 s. The 2.41 s gap represents roughly 100 m of track - a gap visible to the naked eye.
Past 400 metres, the Bmw M440i xDrive continues to build its lead. At 600 metres, it runs at 204 km/h versus 172 km/h. At 1,000 metres, the Bmw M440i xDrive finishes in 22.96 s versus 27.54 s, with a 4.57 s lead.
Both rivals are electronically governed, but not at the same level: the Bmw M440i xDrive is capped at 250 (i.e. 155 mph - industry threshold) km/h, the Bmw iX3 at 180 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 10.53 seconds. The 2.39 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, M440i xDrive F32 wins (4,47 s vs 6,86 s).
M440i xDrive F32 goes from 0 to 100 km/h in 4,47 seconds (calibrated simulation).
M440i xDrive F32: 374 hp, ratio 4,65 kg/hp. iX3 G08: 286 hp, ratio 7,64 kg/hp.
M440i xDrive F32: 250 km/h. iX3 G08: 180 km/h.