Over 0–100 km/h, M135i xDrive F40 wins (4,78 s vs 7,24 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
| Measure | M135i xDrive F40 | i3 I01 | Gap |
|---|---|---|---|
| 0–100 km/h | 4.78 s | 7.24 s | 2.46 s · M135i xDrive F40 |
| 400 m standing start | 13.00 s | 15.40 s | 2.40 s · M135i xDrive F40 |
| 1,000 m standing start | 23.59 s | 29.80 s | 6.21 s · M135i xDrive F40 |
| Top speed (electronically limited) | 250 km/h | 150 km/h | 100 km/h · M135i xDrive F40 |
| Power-to-weight ratio | 4.98 kg/hp | 7.47 kg/hp | better ratio · M135i xDrive F40 |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
| Stage | M135i xDrive F40 | i3 I01 |
|---|---|---|
| 0–30 km/h | 1.33 s | 1.88 s |
| 0–50 km/h | 2.22 s | 3.14 s |
| 0–80 km/h | 3.58 s | 5.25 s |
| 0–100 km/h | 4.78 s | 7.24 s |
| 0–120 km/h | 6.30 s | 9.85 s |
| 0–160 km/h | 10.46 s | - |
| 0–200 km/h | 17.07 s | - |
| 400 m standing start | 13.00 s | 15.40 s |
| 1,000 m standing start | 23.59 s | 29.80 s |
| Top speed limited | 250 km/h | 150 km/h |
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 306 hp | 4 cyl |
| Torque | 450 Nm | |
| Weight | 1 525 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | Eight-speed Steptronic Sport transmission |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 170 hp | Pending |
| Torque | 250 Nm | |
| Weight | 1 270 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | Automatic, single-speed with fixed ratio (9.665:1) |
Off the line, the M135i xDrive hits 100 km/h in 4.78 s versus 7.24 s for the i3. Despite lacking instant torque, 306 hp of power compensates. At this point, the M135i xDrive leads by 2.46 s and sits roughly 20 m ahead.
At 200 metres, the M135i xDrive is doing 144 km/h against 122 km/h for the i3. The gap is 1.58 s. The challenger starts to claw back ground.
At 400 metres standing start, the M135i xDrive crosses the line in 13.00 s versus 15.40 s. The 2.40 s gap represents roughly 96 m of track - a gap visible to the naked eye.
Past 400 metres, the M135i xDrive continues to build its lead. At 600 metres, it runs at 199 km/h versus 150 km/h. At 1,000 metres, the M135i xDrive finishes in 23.59 s versus 29.80 s, with a 6.21 s lead.
The M135i xDrive features all-wheel drive (AWD) against the i3’s RWD. At low speeds (0-30, 0-50, 0-80 km/h), AWD doubles the driven contact area: all four wheels transmit torque to the road, virtually eliminating wheelspin at launch. This traction advantage is decisive in the range where the motor delivers peak torque, before power and aerodynamics take over.
Both rivals are electronically governed, but not at the same level: the M135i xDrive is capped at 250 (i.e. 155 mph - industry threshold) km/h, the i3 at 150 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 11.47 seconds. The 2.46 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, M135i xDrive F40 wins (4,78 s vs 7,24 s).
M135i xDrive F40 goes from 0 to 100 km/h in 4,78 seconds (calibrated simulation).
M135i xDrive F40: 306 hp, ratio 4,98 kg/hp. i3 I01: 170 hp, ratio 7,47 kg/hp.
M135i xDrive F40: 250 km/h. i3 I01: 150 km/h.