Over 0–100 km/h, X3 M40i G01 wins (4,78 s vs 7,36 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| X3 M40i G01 | 520d G60 | |
|---|---|---|
| 0–100 km/h | 4,78 s−2,58 s | 7,36 s |
| 400 m standing start | 13,02 s−2,40 s | 15,42 s |
| 1,000 m standing start | 23,68 s−4,45 s | 28,13 s |
| Top speed (electronically limited) | 250 km/h+17 km/h | 233 km/h |
| Power-to-weight ratio | 5,13 kg/hpbetter ratio | 9,01 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | X3 M40i G01 | 520d G60 |
|---|---|---|
| 0–30 km/h | 1,28 s | 1,67 s |
| 0–50 km/h | 2,12 s | 2,76 s |
| 0–80 km/h | 3,53 s | 5,11 s |
| 0–100 km/h | 4,78 s | 7,36 s |
| 0–120 km/h | 6,35 s | 10,31 s |
| 0–160 km/h | 10,65 s | 18,51 s |
| 0–200 km/h | 17,43 s | 34,13 s |
| 400 m standing start | 13,02 s | 15,42 s |
| 1,000 m standing start | 23,68 s | 28,13 s |
| Top speed limited | 250 km/h | 233 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 360 hp | 6 cyl |
| Torque | 500 Nm | |
| Weight | 1 845 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | 8-speed Steptronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 197 hp | 4 cyl |
| Torque | 400 Nm | |
| Weight | 1 775 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | 8-speed Steptronic transmission |
Off the line, the Bmw X3 M40i hits 100 km/h in 4.78 s versus 7.36 s for the Bmw 520d. At this point, the Bmw X3 M40i leads by 2.58 s and sits roughly 17 m ahead.
At 200 metres, the Bmw X3 M40i is doing 142 km/h against 118 km/h for the Bmw 520d. The gap is 1.49 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw X3 M40i crosses the line in 13.02 s versus 15.41 s. The 2.39 s gap represents roughly 94 m of track - a gap visible to the naked eye.
Past 400 metres, the Bmw X3 M40i continues to build its lead. At 600 metres, it runs at 197 km/h versus 165 km/h. At 1,000 metres, the Bmw X3 M40i finishes in 23.67 s versus 28.13 s, with a 4.46 s lead.
The Bmw X3 M40i features all-wheel drive (AWD) against the Bmw 520d’s RWD. At low speeds (0-30, 0-50, 0-80 km/h), AWD doubles the driven contact area: all four wheels transmit torque to the road, virtually eliminating wheelspin at launch. This traction advantage is decisive in the range where the motor delivers peak torque, before power and aerodynamics take over.
Both rivals are electronically governed, but not at the same level: the Bmw X3 M40i is capped at 250 (i.e. 155 mph - industry threshold) km/h, the Bmw 520d at 233 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.13 kg/hp vs 9.01 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 11.98 seconds. The 2.58 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, X3 M40i G01 wins (4,78 s vs 7,36 s).
X3 M40i G01 goes from 0 to 100 km/h in 4,78 seconds (calibrated simulation).
X3 M40i G01: 360 hp, ratio 5,13 kg/hp. 520d G60: 197 hp, ratio 9,01 kg/hp.
X3 M40i G01: 250 km/h. 520d G60: 233 km/h.