Over 0–100 km/h, X7 xDrive50i G07 wins (5,33 s vs 7,76 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| X7 xDrive50i G07 | e:Ny1 | |
|---|---|---|
| 0–100 km/h | 5,33 s−2,43 s | 7,76 s |
| 400 m standing start | 13,57 s−2,25 s | 15,82 s |
| 1,000 m standing start | 24,64 s−4,77 s | 29,41 s |
| Top speed (electronically limited) | 250 km/h+90 km/h | 160 km/h |
| Power-to-weight ratio | 5,32 kg/hpbetter ratio | 8,34 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | X7 xDrive50i G07 | e:Ny1 |
|---|---|---|
| 0–30 km/h | 1,39 s | 2,17 s |
| 0–50 km/h | 2,29 s | 3,63 s |
| 0–80 km/h | 3,92 s | 5,87 s |
| 0–100 km/h | 5,33 s | 7,76 s |
| 0–120 km/h | 7,08 s | 10,24 s |
| 0–160 km/h | 12,00 s | 18,60 s |
| 0–200 km/h | 19,96 s | - |
| 400 m standing start | 13,57 s | 15,82 s |
| 1,000 m standing start | 24,64 s | 29,41 s |
| Top speed limited | 250 km/h | 160 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 462 hp | 8 cyl |
| Torque | 650 Nm | |
| Weight | 2 460 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | Eight-speed Steptronic transmission |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 201 hp | Permanent Magnet Synchronous Motor |
| Torque | 310 Nm | |
| Weight | 1 677 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | Single-speed fixed gear |
Off the line, the Bmw X7 xDrive50i hits 100 km/h in 5.33 s versus 7.76 s for the e:Ny1. Despite lacking instant torque, 462 hp of power compensates. At this point, the Bmw X7 xDrive50i leads by 2.43 s and sits roughly 27 m ahead.
At 200 metres, the Bmw X7 xDrive50i is doing 137 km/h against 122 km/h for the e:Ny1. The gap is 1.65 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw X7 xDrive50i crosses the line in 13.57 s versus 15.82 s. The 2.25 s gap represents roughly 90 m of track - a gap visible to the naked eye.
Past 400 metres, the Bmw X7 xDrive50i continues to build its lead. At 600 metres, it runs at 190 km/h versus 160 km/h. At 1,000 metres, the Bmw X7 xDrive50i finishes in 24.64 s versus 29.40 s, with a 4.77 s lead.
The Bmw X7 xDrive50i features all-wheel drive (AWD) against the e:Ny1’s FWD. At low speeds (0-30, 0-50, 0-80 km/h), AWD doubles the driven contact area: all four wheels transmit torque to the road, virtually eliminating wheelspin at launch. This traction advantage is decisive in the range where the motor delivers peak torque, before power and aerodynamics take over.
Both rivals are electronically governed, but not at the same level: the Bmw X7 xDrive50i is capped at 250 (i.e. 155 mph - industry threshold) km/h, the e:Ny1 at 160 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 11.83 seconds. The 2.43 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, X7 xDrive50i G07 wins (5,33 s vs 7,76 s).
X7 xDrive50i G07 goes from 0 to 100 km/h in 5,33 seconds (calibrated simulation).
X7 xDrive50i G07: 462 hp, ratio 5,32 kg/hp. e:Ny1: 201 hp, ratio 8,34 kg/hp.
X7 xDrive50i G07: 250 km/h. e:Ny1: 160 km/h.