Over 0–100 km/h, XM 50e G09 wins (5,19 s vs 6,04 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| XM 50e G09 | iX xDrive40 | |
|---|---|---|
| 0–100 km/h | 5,19 s−0,85 s | 6,04 s |
| 400 m standing start | 13,44 s−0,93 s | 14,37 s |
| 1,000 m standing start | 24,30 s−2,07 s | 26,37 s |
| Top speed (electronically limited) | 250 km/h+50 km/h | 200 km/h |
| Power-to-weight ratio | 5,50 kg/hpbetter ratio | 7,48 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | XM 50e G09 | iX xDrive40 |
|---|---|---|
| 0–30 km/h | 1,39 s | 1,42 stight gap |
| 0–50 km/h | 2,33 s | 2,37 stight gap |
| 0–80 km/h | 3,82 s | 4,25 s |
| 0–100 km/h | 5,19 s | 6,04 s |
| 0–120 km/h | 6,88 s | 8,34 s |
| 0–160 km/h | 11,59 s | 15,21 s |
| 0–200 km/h | 18,84 s | 26,44 s |
| 400 m standing start | 13,44 s | 14,37 s |
| 1,000 m standing start | 24,30 s | 26,37 s |
| Top speed limited | 250 km/h | 200 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 476 hp | 4 cyl |
| Torque | 700 Nm | |
| Weight | 2 620 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | Eight-speed M Steptronic transmission |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 326 hp | Pending |
| Torque | 630 Nm | |
| Weight | 2 440 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | Single-speed reduction gear |
Off the line, the Bmw XM 50e hits 100 km/h in 5.19 s versus 6.04 s for the iX xDrive40. At this point, the Bmw XM 50e leads by 0.85 s and sits roughly 4 m ahead.
At 200 metres, the Bmw XM 50e is doing 139 km/h against 127 km/h for the iX xDrive40. The gap is 0.48 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw XM 50e crosses the line in 13.44 s versus 14.36 s. The 0.93 s gap represents roughly 40 m of track - a gap visible to the naked eye.
Past 400 metres, the Bmw XM 50e continues to build its lead. At 600 metres, it runs at 193 km/h versus 175 km/h. At 1,000 metres, the Bmw XM 50e finishes in 24.30 s versus 26.37 s, with a 2.07 s lead.
Both rivals are electronically governed, but not at the same level: the Bmw XM 50e is capped at 250 (i.e. 155 mph - industry threshold) km/h, the iX xDrive40 at 200 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two plug-in hybrid powertrains, the difference comes down to power-to-weight ratio (5.50 kg/hp vs 7.48 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 9.74 seconds. The 0.85 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, XM 50e G09 wins (5,19 s vs 6,04 s).
XM 50e G09 goes from 0 to 100 km/h in 5,19 seconds (calibrated simulation).
XM 50e G09: 476 hp, ratio 5,50 kg/hp. iX xDrive40: 326 hp, ratio 7,48 kg/hp.
XM 50e G09: 250 km/h. iX xDrive40: 200 km/h.