Over 0–100 km/h, X1 sDrive20i F48 wins (7,52 s vs 8,35 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
| Measure | E-PACE P200 | X1 sDrive20i F48 | Gap |
|---|---|---|---|
| 0–100 km/h | 8.35 s | 7.52 s | 0.83 s · X1 sDrive20i F48 |
| 400 m standing start | 16.19 s | 15.51 s | 0.68 s · X1 sDrive20i F48 |
| 1,000 m standing start | 29.41 s | 28.08 s | 1.33 s · X1 sDrive20i F48 |
| Top speed (electronically limited) | 215 km/h | 226 km/h | 11 km/h · X1 sDrive20i F48 |
| Power-to-weight ratio | 8.74 kg/hp | 7.73 kg/hp | better ratio · X1 sDrive20i F48 |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
| Stage | E-PACE P200 | X1 sDrive20i F48 |
|---|---|---|
| 0–30 km/h | 1.98 s | 1.86 s · tight gap |
| 0–50 km/h | 3.33 s | 3.11 s |
| 0–80 km/h | 5.88 s | 5.30 s |
| 0–100 km/h | 8.35 s | 7.52 s |
| 0–120 km/h | 11.44 s | 10.09 s |
| 0–160 km/h | 21.17 s | 18.03 s |
| 0–200 km/h | 45.14 s | 33.66 s |
| 400 m standing start | 16.19 s | 15.51 s |
| 1,000 m standing start | 29.41 s | 28.08 s |
| Top speed | 215 km/h | 226 km/h |
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 200 hp | Pending |
| Torque | 320 Nm | |
| Weight | 1 748 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 9-speed automatic ZF |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 192 hp | 4 cyl |
| Torque | 280 Nm | |
| Weight | 1 485 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 7-speed Steptronic with double clutch |
Off the line, the X1 sDrive20i hits 100 km/h in 7.52 s versus 8.35 s for the E-PACE P200. At this point, the X1 sDrive20i leads by 0.83 s and sits roughly 8 m ahead.
At 200 metres, the X1 sDrive20i is doing 121 km/h against 115 km/h for the E-PACE P200. The gap is 0.42 s. The challenger starts to claw back ground.
At 400 metres standing start, the X1 sDrive20i crosses the line in 15.51 s versus 16.19 s. The 0.68 s gap represents roughly 27 m of track - two to three car lengths.
Past 400 metres, the X1 sDrive20i continues to build its lead. At 600 metres, it runs at 167 km/h versus 159 km/h. At 1,000 metres, the X1 sDrive20i finishes in 28.07 s versus 29.41 s, with a 1.34 s lead. Both vehicles have similar top speeds (215 vs 226 km/h), preventing any comeback.
Both rivals are electronically governed, but not at the same level: the E-PACE P200 is capped at 215 km/h, the X1 sDrive20i at 226 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (8.74 kg/hp vs 7.73 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 13.46 seconds. The 0.83 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, X1 sDrive20i F48 wins (7,52 s vs 8,35 s).
E-PACE P200 goes from 0 to 100 km/h in 8,35 seconds (calibrated simulation).
E-PACE P200: 200 hp, ratio 8,74 kg/hp. X1 sDrive20i F48: 192 hp, ratio 7,73 kg/hp.
E-PACE P200: 215 km/h. X1 sDrive20i F48: 226 km/h.