Over 0–100 km/h, 120i F40 wins (6,91 s vs 8,32 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
| Measure | V 300 d 4MATIC | 120i F40 | Gap |
|---|---|---|---|
| 0–100 km/h | 8.32 s | 6.91 s | 1.41 s · 120i F40 |
| 400 m standing start | 16.03 s | 15.02 s | 1.01 s · 120i F40 |
| 1,000 m standing start | 29.56 s | 27.09 s | 2.47 s · 120i F40 |
| Top speed (electronically limited) | 210 km/h | 235 km/h | 25 km/h · 120i F40 |
| Power-to-weight ratio | 9.44 kg/hp | 7.81 kg/hp | better ratio · 120i F40 |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
| Stage | V 300 d 4MATIC | 120i F40 |
|---|---|---|
| 0–30 km/h | 1.60 s | 1.76 s |
| 0–50 km/h | 2.77 s | 2.94 s |
| 0–80 km/h | 5.51 s | 4.96 s |
| 0–100 km/h | 8.32 s | 6.91 s |
| 0–120 km/h | 11.54 s | 9.21 s |
| 0–160 km/h | 22.22 s | 16.06 s |
| 0–200 km/h | 51.69 s | 27.89 s |
| 400 m standing start | 16.03 s | 15.02 s |
| 1,000 m standing start | 29.56 s | 27.09 s |
| Top speed | 210 km/h | 235 km/h |
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 245 hp | Pending |
| Torque | 500 Nm | |
| Weight | 2 312 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | Unknown |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 178 hp | 4 cyl |
| Torque | 280 Nm | |
| Weight | 1 390 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | Seven-speed Steptronic dual-clutch transmission |
Off the line, the 120i hits 100 km/h in 6.91 s versus 8.32 s for the V 300 d 4MATIC. At this point, the 120i leads by 1.41 s and sits roughly 4 m ahead.
At 200 metres, the 120i is doing 124 km/h against 114 km/h for the V 300 d 4MATIC. The gap is 0.44 s. The challenger starts to claw back ground.
At 400 metres standing start, the 120i crosses the line in 15.02 s versus 16.03 s. The 1.01 s gap represents roughly 38 m of track - a gap visible to the naked eye.
Past 400 metres, the 120i continues to build its lead. At 600 metres, it runs at 174 km/h versus 156 km/h. At 1,000 metres, the 120i finishes in 27.09 s versus 29.55 s, with a 2.46 s lead.
The V 300 d 4MATIC features all-wheel drive (AWD) against the 120i’s FWD. At low speeds (0-30, 0-50, 0-80 km/h), AWD doubles the driven contact area: all four wheels transmit torque to the road, virtually eliminating wheelspin at launch. This traction advantage is decisive in the range where the motor delivers peak torque, before power and aerodynamics take over.
Both rivals are electronically governed, but not at the same level: the V 300 d 4MATIC is capped at 217 km/h, the 120i at 235 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (9.44 kg/hp vs 7.81 kg/hp) and transmission (Unknown vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 14.08 seconds. The 1.41 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, 120i F40 wins (6,91 s vs 8,32 s).
V 300 d 4MATIC goes from 0 to 100 km/h in 8,32 seconds (calibrated simulation).
V 300 d 4MATIC: 245 hp, ratio 9,44 kg/hp. 120i F40: 178 hp, ratio 7,81 kg/hp.
V 300 d 4MATIC: 210 km/h. 120i F40: 235 km/h.