Over 0–100 km/h, A110 S 292 wins (3,93 s vs 6,31 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
| Measure | A110 S 292 | P7i | Gap |
|---|---|---|---|
| 0–100 km/h | 3.93 s | 6.31 s | 2.38 s · A110 S 292 |
| 400 m standing start | 12.09 s | 14.57 s | 2.48 s · A110 S 292 |
| 1,000 m standing start | 22.16 s | 26.38 s | 4.22 s · A110 S 292 |
| Top speed (electronically limited) | 264 km/h | 200 km/h | 64 km/h · A110 S 292 |
| Power-to-weight ratio | 3.76 kg/hp | 7.18 kg/hp | better ratio · A110 S 292 |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
| Stage | A110 S 292 | P7i |
|---|---|---|
| 0–30 km/h | 1.09 s | 1.66 s |
| 0–50 km/h | 1.83 s | 2.77 s |
| 0–80 km/h | 3.02 s | 4.62 s |
| 0–100 km/h | 3.93 s | 6.31 s |
| 0–120 km/h | 5.26 s | 8.47 s |
| 0–160 km/h | 8.57 s | 14.90 s |
| 0–200 km/h | 13.51 s | 25.20 s |
| 400 m standing start | 12.09 s | 14.57 s |
| 1,000 m standing start | 22.16 s | 26.38 s |
| Top speed | 264 km/h | 200 km/h |
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 296 hp | Pending |
| Torque | 320 Nm | |
| Weight | 1 114 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 7-speed dual-clutch |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 282 hp | Permanent Magnet Synchronous Motor |
| Torque | 430 Nm | |
| Weight | 2 025 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | Single-speed fixed gear |
Off the line, the A110 S 292 hits 100 km/h in 3.93 s versus 6.31 s for the P7i. Despite lacking instant torque, 296 hp of power compensates. At this point, the A110 S 292 leads by 2.38 s and sits roughly 19 m ahead.
At 200 metres, the A110 S 292 is doing 154 km/h against 129 km/h for the P7i. The gap is 1.66 s. The challenger starts to claw back ground.
At 400 metres standing start, the A110 S 292 crosses the line in 12.08 s versus 14.56 s. The 2.48 s gap represents roughly 104 m of track - a gap visible to the naked eye.
Past 400 metres, the A110 S 292 continues to build its lead. At 600 metres, it runs at 210 km/h versus 178 km/h. At 1,000 metres, the A110 S 292 finishes in 22.15 s versus 26.38 s, with a 4.22 s lead.
Electronically capped at 200 km/h, the P7i never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 9.78 seconds. The 2.38 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, A110 S 292 wins (3,93 s vs 6,31 s).
A110 S 292 goes from 0 to 100 km/h in 3,93 seconds (calibrated simulation).
A110 S 292: 296 hp, ratio 3,76 kg/hp. P7i: 282 hp, ratio 7,18 kg/hp.
A110 S 292: 264 km/h. P7i: 200 km/h.