Over 0–100 km/h, 120i F40 wins (6,91 s vs 9,78 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| 120i F40 | 308 PureTech 130 | |
|---|---|---|
| 0–100 km/h | 6,91 s−2,87 s | 9,78 s |
| 400 m standing start | 15,02 s−2,32 s | 17,34 s |
| 1,000 m standing start | 27,09 s−3,55 s | 30,64 s |
| Top speed (electronically limited) | 235 km/h+18 km/h | 217 km/h |
| Power-to-weight ratio | 7,81 kg/hpbetter ratio | 9,31 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | 120i F40 | 308 PureTech 130 |
|---|---|---|
| 0–30 km/h | 1,76 s | 2,76 s |
| 0–50 km/h | 2,94 s | 4,61 s |
| 0–80 km/h | 4,96 s | 7,37 s |
| 0–100 km/h | 6,91 s | 9,78 s |
| 0–120 km/h | 9,21 s | 12,98 s |
| 0–160 km/h | 16,06 s | 22,75 s |
| 0–200 km/h | 27,89 s | 45,99 s |
| 400 m standing start | 15,02 s | 17,34 s |
| 1,000 m standing start | 27,09 s | 30,64 s |
| Top speed | 235 km/h | 217 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 178 hp | 4 cyl |
| Torque | 280 Nm | |
| Weight | 1 390 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | Seven-speed Steptronic dual-clutch transmission |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 131 hp | 3 cyl |
| Torque | 230 Nm | |
| Weight | 1 220 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | 6-speed automatic (EAT6) |
Off the line, the Bmw 120i hits 100 km/h in 6.91 s versus 9.78 s for the 308 PureTech 130. At this point, the Bmw 120i leads by 2.87 s and sits roughly 34 m ahead.
At 200 metres, the Bmw 120i is doing 124 km/h against 113 km/h for the 308 PureTech 130. The gap is 1.81 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw 120i crosses the line in 15.02 s versus 17.34 s. The 2.32 s gap represents roughly 88 m of track - a gap visible to the naked eye.
Past 400 metres, the Bmw 120i continues to build its lead. At 600 metres, it runs at 174 km/h versus 158 km/h. At 1,000 metres, the Bmw 120i finishes in 27.09 s versus 30.64 s, with a 3.55 s lead.
Electronically capped at 235 km/h, the Bmw 120i never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (7.81 kg/hp vs 9.31 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 14.90 seconds. The 2.87 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, 120i F40 wins (6,91 s vs 9,78 s).
120i F40 goes from 0 to 100 km/h in 6,91 seconds (calibrated simulation).
120i F40: 178 hp, ratio 7,81 kg/hp. 308 PureTech 130: 131 hp, ratio 9,31 kg/hp.
120i F40: 235 km/h. 308 PureTech 130: 217 km/h.