Over 0–100 km/h, Ateca wins (7,15 s vs 7,52 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| X1 sDrive20i F48 | Ateca | |
|---|---|---|
| 0–100 km/h | 7,52 s | 7,15 s+0,37 s |
| 400 m standing start | 15,51 s | 15,32 s+0,19 s |
| 1,000 m standing start | 28,08 s | 27,82 s+0,26 s |
| Top speed (electronically limited) | 226 km/h+8 km/h | 218 km/h |
| Power-to-weight ratio | 7,73 kg/hpbetter ratio | 8,50 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | X1 sDrive20i F48 | Ateca |
|---|---|---|
| 0–30 km/h | 1,86 s | 1,96 stight gap |
| 0–50 km/h | 3,11 s | 2,93 s |
| 0–80 km/h | 5,30 s | 5,15 stight gap |
| 0–100 km/h | 7,52 s | 7,15 s |
| 0–120 km/h | 10,09 s | 9,81 s |
| 0–160 km/h | 18,03 s | 17,57 s |
| 0–200 km/h | 33,66 s | 32,93 s |
| 400 m standing start | 15,51 s | 15,32 s |
| 1,000 m standing start | 28,08 s | 27,82 s |
| Top speed | 226 km/h | 218 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 192 hp | 4 cyl |
| Torque | 280 Nm | |
| Weight | 1 485 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 7-speed Steptronic with double clutch |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 190 hp | Pending |
| Torque | 320 Nm | |
| Weight | 1 615 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | 7-speed DSG |
Off the line, the Ateca hits 100 km/h in 7.15 s versus 7.52 s for the Bmw X1 sDrive20i. At this point, the Ateca leads by 0.37 s and sits roughly 3 m ahead.
At 200 metres, the Ateca is doing 122 km/h against 121 km/h for the Bmw X1 sDrive20i. The gap is 0.14 s. The challenger starts to claw back ground.
At 400 metres standing start, the Ateca crosses the line in 15.32 s versus 15.51 s. The 0.19 s gap represents roughly 8 m of track - barely a car length.
Past 400 metres, the Ateca continues to build its lead. At 600 metres, it runs at 168 km/h versus 167 km/h. At 1,000 metres, the Ateca finishes in 27.81 s versus 28.07 s, with a 0.26 s lead. Both vehicles have similar top speeds (226 vs 218 km/h), preventing any comeback.
Both rivals are electronically governed, but not at the same level: the Bmw X1 sDrive20i is capped at 226 km/h, the Ateca at 218 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (7.73 kg/hp vs 8.50 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 11.72 seconds. The 0.37 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, Ateca wins (7,15 s vs 7,52 s).
X1 sDrive20i F48 goes from 0 to 100 km/h in 7,52 seconds (calibrated simulation).
X1 sDrive20i F48: 192 hp, ratio 7,73 kg/hp. Ateca: 190 hp, ratio 8,50 kg/hp.
X1 sDrive20i F48: 226 km/h. Ateca: 218 km/h.