Over 0–100 km/h, X6 M50d F16 wins (5,29 s vs 5,98 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| X6 M50d F16 | DS7 E-Tense 4x4 300 | |
|---|---|---|
| 0–100 km/h | 5,29 s−0,69 s | 5,98 s |
| 400 m standing start | 13,63 s−0,64 s | 14,27 s |
| 1,000 m standing start | 24,91 s−1,50 s | 26,41 s |
| Top speed (electronically limited) | 250 km/h+20 km/h | 230 km/h |
| Power-to-weight ratio | 5,73 kg/hpbetter ratio | 6,23 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | X6 M50d F16 | DS7 E-Tense 4x4 300 |
|---|---|---|
| 0–30 km/h | 1,40 s | 1,31 stight gap |
| 0–50 km/h | 2,26 s | 2,11 stight gap |
| 0–80 km/h | 3,83 s | 4,09 s |
| 0–100 km/h | 5,29 s | 5,98 s |
| 0–120 km/h | 7,14 s | 8,25 s |
| 0–160 km/h | 12,41 s | 15,16 s |
| 0–200 km/h | 21,42 s | 28,87 s |
| 400 m standing start | 13,63 s | 14,27 s |
| 1,000 m standing start | 24,91 s | 26,41 s |
| Top speed limited | 250 km/h | 230 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 381 hp | 6 cyl |
| Torque | 740 Nm | |
| Weight | 2 185 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | Eight-speed Steptronic transmission |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 305 hp | Pending |
| Torque | 500 Nm | |
| Weight | 1 900 kg | manufacturer kerb weight |
| Drivetrain | Integrale (4WD) | |
| Gearbox | 8-speed automatic |
Off the line, the Bmw X6 M50d hits 100 km/h in 5.29 s versus 5.98 s for the DS7 E-Tense 4x4 300. Despite lacking instant torque, 381 hp of power compensates. At this point, the Bmw X6 M50d leads by 0.69 s and sits roughly 2 m ahead.
At 200 metres, the Bmw X6 M50d is doing 135 km/h against 127 km/h for the DS7 E-Tense 4x4 300. The gap is 0.31 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw X6 M50d crosses the line in 13.62 s versus 14.27 s. The 0.65 s gap represents roughly 28 m of track - two to three car lengths.
Past 400 metres, the Bmw X6 M50d continues to build its lead. At 600 metres, it runs at 187 km/h versus 174 km/h. At 1,000 metres, the Bmw X6 M50d finishes in 24.91 s versus 26.41 s, with a 1.50 s lead.
Electronically capped at 250 (i.e. 155 mph - industry threshold) km/h, the Bmw X6 M50d never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 9.63 seconds. The 0.69 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, X6 M50d F16 wins (5,29 s vs 5,98 s).
X6 M50d F16 goes from 0 to 100 km/h in 5,29 seconds (calibrated simulation).
X6 M50d F16: 381 hp, ratio 5,73 kg/hp. DS7 E-Tense 4x4 300: 305 hp, ratio 6,23 kg/hp.
X6 M50d F16: 250 km/h. DS7 E-Tense 4x4 300: 230 km/h.