Over 0–100 km/h, ID.3 Pro wins (7,35 s vs 7,45 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
| Measure | Leon VZe | ID.3 Pro | Gap |
|---|---|---|---|
| 0–100 km/h | 7.45 s | 7.35 s | 0.10 s · ID.3 Pro |
| 400 m standing start | 15.42 s | 15.50 s | 0.08 s · Leon VZe |
| 1,000 m standing start | 27.49 s | 29.13 s | 1.64 s · Leon VZe |
| Top speed (electronically limited) | 225 km/h | 160 km/h | 65 km/h · Leon VZe |
| Power-to-weight ratio | 6.76 kg/hp | 8.82 kg/hp | better ratio · Leon VZe |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
| Stage | Leon VZe | ID.3 Pro |
|---|---|---|
| 0–30 km/h | 2.08 s | 1.88 s |
| 0–50 km/h | 3.48 s | 3.15 s |
| 0–80 km/h | 5.63 s | 5.31 s |
| 0–100 km/h | 7.45 s | 7.35 s · tight gap |
| 0–120 km/h | 9.63 s | 10.01 s |
| 0–160 km/h | 16.26 s | 18.97 s |
| 0–200 km/h | 29.27 s | - |
| 400 m standing start | 15.42 s · tight gap | 15.50 s |
| 1,000 m standing start | 27.49 s | 29.13 s |
| Top speed | 225 km/h | 160 km/h |
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 241 hp | Pending |
| Torque | 350 Nm | |
| Weight | 1 630 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | 6-speed DSG |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 204 hp | Permanent Magnet Synchronous Motor |
| Torque | 310 Nm | |
| Weight | 1 800 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | Single-speed fixed gear |
Off the line, the ID.3 Pro hits 100 km/h in 7.35 s versus 7.45 s for the Leon VZe. At this point, the ID.3 Pro leads by 0.10 s and sits roughly 7 m ahead.
At 200 metres, the ID.3 Pro is doing 121 km/h against 126 km/h for the Leon VZe. The gap is 0.16 s. The gap widens compared to the 0-100.
At 400 metres standing start, the Leon VZe crosses the line in 15.41 s versus 15.50 s. The 0.09 s gap represents roughly 4 m of track - barely a car length.
Past 400 metres, the Leon VZe continues to build its lead. At 600 metres, it runs at 174 km/h versus 160 km/h. At 1,000 metres, the Leon VZe finishes in 27.49 s versus 29.13 s, with a 1.64 s lead.
On paper, the Leon VZe combines 241 hp, 350 Nm and 1,630 kg - a clear theoretical edge over the ID.3 Pro. Yet the ID.3 Pro launches quicker. At standstill, both motors deliver peak torque from 0 rpm: the decisive factor is no longer raw power, but available grip. If the ID.3 Pro has a better traction coefficient (tyres, weight distribution, traction control calibration), it puts down more force despite inferior specs - exactly what the simulation reflects, calibrated on manufacturer 0-100 km/h times.
Both rivals are electronically governed, but not at the same level: the Leon VZe is capped at 225 km/h, the ID.3 Pro at 160 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two plug-in hybrid powertrains, the difference comes down to power-to-weight ratio (6.76 kg/hp vs 8.82 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 11.71 seconds. The 0.10 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, ID.3 Pro wins (7,35 s vs 7,45 s).
Leon VZe goes from 0 to 100 km/h in 7,45 seconds (calibrated simulation).
Leon VZe: 241 hp, ratio 6,76 kg/hp. ID.3 Pro: 204 hp, ratio 8,82 kg/hp.
Leon VZe: 225 km/h. ID.3 Pro: 160 km/h.