Sur 0–100 km/h, 230i F22 gagne (5,51 s vs 6,26 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| 230i F22 | A 250 W177 | |
|---|---|---|
| 0–100 km/h | 5,51 s−0,75 s | 6,26 s |
| 400 m standing start | 13,88 s−0,51 s | 14,39 s |
| 1,000 m standing start | 25,28 s−0,28 s | 25,56 s |
| Top speed (electronically limited) | 250 km/h | 250 km/h |
| Power-to-weight ratio | 5,67 kg/hpbetter ratio | 6,47 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | 230i F22 | A 250 W177 |
|---|---|---|
| 0–30 km/h | 1,42 s | 1,96 s |
| 0–50 km/h | 2,29 s | 3,04 s |
| 0–80 km/h | 3,99 s | 4,70 s |
| 0–100 km/h | 5,51 s | 6,26 s |
| 0–120 km/h | 7,53 s | 8,08 s |
| 0–160 km/h | 13,14 s | 13,25 stight gap |
| 0–200 km/h | 22,07 s | 21,39 s |
| 400 m standing start | 13,88 s | 14,39 s |
| 1,000 m standing start | 25,28 s | 25,56 s |
| Top speed limited | 250 km/h | 250 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 252 hp | 4 cyl |
| Torque | 350 Nm | |
| Weight | 1 430 kg | manufacturer kerb weight |
| Drivetrain | — | |
| Gearbox | 8-speed Steptronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 224 hp | |
| Torque | 350 Nm | |
| Weight | 1 450 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | 7G-DCT dual-clutch |
Off the line, the Bmw 230i hits 100 km/h in 5.51 s versus 6.26 s for the A 250. At this point, the Bmw 230i leads by 0.75 s and sits roughly 15 m ahead.
At 200 metres, the Bmw 230i is doing 133 km/h against 134 km/h for the A 250. The gap is 0.59 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw 230i crosses the line in 13.87 s versus 14.39 s. The 0.52 s gap represents roughly 24 m of track — two to three car lengths.
Past 400 metres, the gap narrows.
At 1,000 metres, the Bmw 230i finishes in 25.28 s versus 25.56 s, with just 0.28 s to spare. The A 250 fails to fully close the launch gap.
Both rivals share the same electronic speed cap: the Bmw 230i and the A 250 are governed to 250 (i.e. 155 mph — industry threshold) km/h. At that speed, standard-fit tyres approach their safety threshold — an industrial ceiling common to most electric vehicles in this segment. Neither car shows its true aerodynamic potential in this duel.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.67 kg/hp vs 6.47 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 9.15 seconds. The 0.75 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Sur 0–100 km/h, 230i F22 gagne (5,51 s vs 6,26 s).
230i F22 passe de 0 à 100 km/h en 5,51 secondes (simulation calibrée).
230i F22 : 252 hp, ratio 5,67 kg/hp. A 250 W177 : 224 hp, ratio 6,47 kg/hp.
230i F22 : 250 km/h. A 250 W177 : 250 km/h.