Over 0–100 km/h, Boxster wins (5,71 s vs 5,86 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
| Measure | Boxster | 230i Convertible F22 | Gap |
|---|---|---|---|
| 0–100 km/h | 5.71 s | 5.86 s | 0.15 s · Boxster |
| 400 m standing start | 13.89 s | 14.21 s | 0.32 s · Boxster |
| 1,000 m standing start | 25.03 s | 26.01 s | 0.98 s · Boxster |
| Top speed (electronically limited) | 261 km/h | 250 km/h | 11 km/h · Boxster |
| Power-to-weight ratio | 5.27 kg/hp | 6.25 kg/hp | better ratio · Boxster |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
| Stage | Boxster | 230i Convertible F22 |
|---|---|---|
| 0–30 km/h | 1.50 s | 1.38 s · tight gap |
| 0–50 km/h | 2.44 s | 2.29 s · tight gap |
| 0–80 km/h | 4.24 s | 4.18 s · tight gap |
| 0–100 km/h | 5.71 s | 5.86 s |
| 0–120 km/h | 7.60 s | 8.10 s |
| 0–160 km/h | 12.65 s | 14.44 s |
| 0–200 km/h | 20.75 s | 24.93 s |
| 400 m standing start | 13.89 s | 14.21 s |
| 1,000 m standing start | 25.03 s | 26.01 s |
| Top speed limited | 261 km/h | 250 km/h |
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 259 hp | B6 |
| Torque | 290 Nm | |
| Weight | 1 365 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | DUAL_CLUTCH |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 252 hp | 4 cyl |
| Torque | 350 Nm | |
| Weight | 1 575 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 8-speed Steptronic |
Off the line, the Boxster hits 100 km/h in 5.71 s versus 5.86 s for the 230i Convertible. Despite the faster sprint time, the 230i Convertible is 2 m further along the track at this moment: stronger low-speed acceleration offsets a slower run beyond 100 km/h.
At 200 metres, the Boxster is doing 134 km/h against 129 km/h for the 230i Convertible. The gap is 0.07 s. The gap remains stable from the start.
At 400 metres standing start, the Boxster crosses the line in 13.88 s versus 14.21 s. The 0.33 s gap represents roughly 14 m of track - two to three car lengths.
Past 400 metres, the Boxster continues to build its lead. At 600 metres, it runs at 189 km/h versus 178 km/h. At 1,000 metres, the Boxster finishes in 25.03 s versus 26.01 s, with a 0.98 s lead. Both vehicles have similar top speeds (261 vs 250 (i.e. 155 mph - industry threshold) km/h), preventing any comeback.
Both rivals are electronically governed, but not at the same level: the Boxster is capped at 261 km/h, the 230i Convertible at 250 (i.e. 155 mph - industry threshold) km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.27 kg/hp vs 6.25 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 9.32 seconds. The 0.15 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, Boxster wins (5,71 s vs 5,86 s).
Boxster goes from 0 to 100 km/h in 5,71 seconds (calibrated simulation).
Boxster: 259 hp, ratio 5,27 kg/hp. 230i Convertible F22: 252 hp, ratio 6,25 kg/hp.
Boxster: 261 km/h. 230i Convertible F22: 250 km/h.