Sur 0–100 km/h, 520e G30 gagne (8,07 s vs 8,36 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| DS9 E-Tense 250 | 520e G30 | |
|---|---|---|
| 0–100 km/h | 8,36 s | 8,07 s+0,29 s |
| 400 m standing start | 16,22 s | 15,87 s+0,35 s |
| 1,000 m standing start | 28,57 s−0,92 s | 29,49 s |
| Top speed (electronically limited) | 235 km/h+22 km/h | 213 km/h |
| Power-to-weight ratio | 7,51 kg/hpbetter ratio | 9,31 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | DS9 E-Tense 250 | 520e G30 |
|---|---|---|
| 0–30 km/h | 2,40 s | 1,44 s |
| 0–50 km/h | 4,01 s | 2,58 s |
| 0–80 km/h | 6,47 s | 5,37 s |
| 0–100 km/h | 8,36 s | 8,07 s |
| 0–120 km/h | 10,88 s | 11,61 s |
| 0–160 km/h | 18,12 s | 22,82 s |
| 0–200 km/h | 31,70 s | 52,29 s |
| 400 m standing start | 16,22 s | 15,87 s |
| 1,000 m standing start | 28,57 s | 29,49 s |
| Top speed | 235 km/h | 213 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 253 hp | Pending |
| Torque | 520 Nm | |
| Weight | 1 900 kg | manufacturer kerb weight |
| Drivetrain | DS9 E-Tense 250 | |
| Gearbox | 8-speed automatic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 204 hp | 4 cyl |
| Torque | 350 Nm | |
| Weight | 1 900 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | Eight-speed Steptronic transmission |
Off the line, the Bmw 520e hits 100 km/h in 8.07 s versus 8.36 s for the DS9 E-Tense 250. At this point, the Bmw 520e leads by 0.29 s and sits roughly 26 m ahead.
At 200 metres, the Bmw 520e is doing 113 km/h against 121 km/h for the DS9 E-Tense 250. The gap is 0.81 s. The gap widens compared to the 0-100.
At 400 metres standing start, the Bmw 520e crosses the line in 15.86 s versus 16.22 s. The 0.35 s gap represents roughly 15 m of track — two to three car lengths.
Past 400 metres, the situation changes. The Bmw 520e maxes out at 213 km/h while the DS9 E-Tense 250 keeps accelerating towards 235 km/h. At 600 metres, the gap has dropped to 0.09 s.
Around 560 metres, both vehicles are level. This is the inversion point: the DS9 E-Tense 250 overcomes its launch deficit thanks to a 22 km/h higher top speed.
At 1,000 metres, the DS9 E-Tense 250 finishes in 28.57 s versus 29.49 s. The 0.92 s delta in favour of the DS9 E-Tense 250 shows that top speed makes a clear difference.
Electronically capped at 218 km/h, the Bmw 520e never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor — it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two plug-in hybrid powertrains, the difference comes down to power-to-weight ratio (7.51 kg/hp vs 9.31 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 13.80 seconds. The 0.29 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Sur 0–100 km/h, 520e G30 gagne (8,07 s vs 8,36 s).
DS9 E-Tense 250 passe de 0 à 100 km/h en 8,36 secondes (simulation calibrée).
DS9 E-Tense 250 : 253 hp, ratio 7,51 kg/hp. 520e G30 : 204 hp, ratio 9,31 kg/hp.
DS9 E-Tense 250 : 235 km/h. 520e G30 : 213 km/h.