Over 0–100 km/h, M440i G22 and Boxster Spyder are neck and neck (4,77 s vs 4,83 s, no significant gap).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
| Measure | M440i G22 | Boxster Spyder | Gap |
|---|---|---|---|
| 0–100 km/h | 4.83 s | 4.77 s | 0.06 s · Boxster Spyder |
| 400 m standing start | 12.93 s | 12.69 s | 0.24 s · Boxster Spyder |
| 1,000 m standing start | 23.15 s | 22.73 s | 0.42 s · Boxster Spyder |
| Top speed (electronically limited) | 250 km/h | 274 km/h | 24 km/h · Boxster Spyder |
| Power-to-weight ratio | 4.53 kg/hp | 4.01 kg/hp | better ratio · Boxster Spyder |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
| Stage | M440i G22 | Boxster Spyder |
|---|---|---|
| 0–30 km/h | 1.39 s | 1.35 s · tight gap |
| 0–50 km/h | 2.31 s | 2.26 s · tight gap |
| 0–80 km/h | 3.68 s · tight gap | 3.70 s |
| 0–100 km/h | 4.83 s | 4.77 s · tight gap |
| 0–120 km/h | 6.24 s | 5.96 s |
| 0–160 km/h | 10.05 s | 9.35 s |
| 0–200 km/h | 15.69 s | 14.53 s |
| 400 m standing start | 12.93 s | 12.69 s |
| 1,000 m standing start | 23.15 s | 22.73 s |
| Top speed limited | 250 km/h | 274 km/h |
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 374 hp | Pending |
| Torque | 500 Nm | |
| Weight | 1 695 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | Eight-speed Steptronic transmission |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 324 hp | B6 |
| Torque | 370 Nm | |
| Weight | 1 300 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | DUAL_CLUTCH |
Off the line, the Boxster Spyder hits 100 km/h in 4.77 s versus 4.83 s for the M440i. The 0.06 s gap is negligible: both vehicles are neck and neck.
At 200 metres, the Boxster Spyder is doing 151 km/h against 146 km/h for the M440i. The gap is 0.10 s. The gap remains stable from the start.
At 400 metres standing start, the Boxster Spyder crosses the line in 12.69 s versus 12.93 s. The 0.24 s gap represents roughly 12 m of track - two to three car lengths.
Past 400 metres, the Boxster Spyder continues to build its lead. At 600 metres, it runs at 210 km/h versus 205 km/h. At 1,000 metres, the Boxster Spyder finishes in 22.73 s versus 23.15 s, with a 0.42 s lead.
Electronically capped at 250 (i.e. 155 mph - industry threshold) km/h, the M440i never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (4.53 kg/hp vs 4.01 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 7.06 seconds. The 0.06 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, M440i G22 and Boxster Spyder are neck and neck (4,77 s vs 4,83 s, no significant gap).
M440i G22 goes from 0 to 100 km/h in 4,83 seconds (calibrated simulation).
M440i G22: 374 hp, ratio 4,53 kg/hp. Boxster Spyder: 324 hp, ratio 4,01 kg/hp.
M440i G22: 250 km/h. Boxster Spyder: 274 km/h.