Over 0–100 km/h, Focus ST 250 Gen3 wins (6,43 s vs 8,12 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| Focus ST 250 Gen3 | 5 E-Tech Electric 150 | |
|---|---|---|
| 0–100 km/h | 6,43 s−1,69 s | 8,12 s |
| 400 m standing start | 14,56 s−1,58 s | 16,14 s |
| 1,000 m standing start | 25,77 s−4,85 s | 30,62 s |
| Top speed (electronically limited) | 254 km/h+104 km/h | 150 km/h |
| Power-to-weight ratio | 5,56 kg/hpbetter ratio | 10,16 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | Focus ST 250 Gen3 | 5 E-Tech Electric 150 |
|---|---|---|
| 0–30 km/h | 1,83 s | 2,07 s |
| 0–50 km/h | 3,06 s | 3,46 s |
| 0–80 km/h | 5,09 s | 5,85 s |
| 0–100 km/h | 6,43 s | 8,12 s |
| 0–120 km/h | 8,42 s | 11,18 s |
| 0–160 km/h | 13,56 s | - |
| 0–200 km/h | 21,65 s | - |
| 400 m standing start | 14,56 s | 16,14 s |
| 1,000 m standing start | 25,77 s | 30,62 s |
| Top speed | 254 km/h | 150 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 250 hp | Pending |
| Torque | 360 Nm | |
| Weight | 1 390 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 6-speed manual |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 150 hp | Permanent Magnet Synchronous Motor |
| Torque | 245 Nm | |
| Weight | 1 524 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | Single-speed fixed gear |
Off the line, the Focus ST 250 Gen3 hits 100 km/h in 6.43 s versus 8.12 s for the 5 E-Tech Electric 150. Despite lacking instant torque, 250 hp of power compensates. At this point, the Focus ST 250 Gen3 leads by 1.69 s and sits roughly 10 m ahead.
At 200 metres, the Focus ST 250 Gen3 is doing 134 km/h against 117 km/h for the 5 E-Tech Electric 150. The gap is 0.81 s. The challenger starts to claw back ground.
At 400 metres standing start, the Focus ST 250 Gen3 crosses the line in 14.55 s versus 16.13 s. The 1.58 s gap represents roughly 61 m of track - a gap visible to the naked eye.
Past 400 metres, the Focus ST 250 Gen3 continues to build its lead. At 600 metres, it runs at 188 km/h versus 150 km/h. At 1,000 metres, the Focus ST 250 Gen3 finishes in 25.77 s versus 30.62 s, with a 4.85 s lead.
Electronically capped at 150 km/h, the 5 E-Tech Electric 150 never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 13.23 seconds. The 1.69 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, Focus ST 250 Gen3 wins (6,43 s vs 8,12 s).
Focus ST 250 Gen3 goes from 0 to 100 km/h in 6,43 seconds (calibrated simulation).
Focus ST 250 Gen3: 250 hp, ratio 5,56 kg/hp. 5 E-Tech Electric 150: 150 hp, ratio 10,16 kg/hp.
Focus ST 250 Gen3: 254 km/h. 5 E-Tech Electric 150: 150 km/h.